C-TS414-2023시험대비최신공부자료 - C-TS414-2023덤프공부자료

ITDumpsKR는 많은 분들이 SAP C-TS414-2023인증시험을 응시하여 성공하도록 도와주는 사이트입니다. ITDumpsKR 의 C-TS414-2023덤프는 모두 엘리트한 전문가들이 만들어낸 만큼 시험문제의 적중률은 아주 높습니다. 거의 100%의 정확도를 자랑하고 있습니다. 아마 많은 유사한 사이트들도 많습니다. 이러한 사이트에서 학습가이드와 온라인서비스도 지원되고 있습니다만 ITDumpsKR 는 이미 이러한 C-TS414-2023 사이트를 뛰어넘은 실력으로 업계에서 우리만의 이미지를 지키고 있습니다. ITDumpsKR 는 정확한 문제와 답만 제공하고 또한 그 어느 사이트보다도 빠른 업데이트로 여러분의 인증시험을 안전하게 패스하도록 합니다.

ITDumpsKR는 고객님께서SAP C-TS414-2023첫번째 시험에서 패스할수 있도록 최선을 다하고 있습니다. 만일 어떤 이유로 인해 고객님이SAP C-TS414-2023시험에서 실패를 한다면 ITDumpsKR는SAP C-TS414-2023덤프비용 전액을 환불 해드립니다. 시중에서 가장 최신버전인SAP C-TS414-2023덤프로 시험패스 예약하세요.

>> C-TS414-2023시험대비 최신 공부자료 <<

도비 SAP C-TS414-2023 시험

SAP C-TS414-2023 시험요강:

주제	소개
주제 1	Quality Planning: The topic explains the configuration requirements of Quality Planning.
주제 2	Quality Management in Procurement and Inventory Management: It focuses on the integration of QM integrates with Procurement and Inventory Management.
주제 3	Quality Management in Sales and Distribution: The topic describes the integration of QM with Sales and Distribution.
주제 4	Quality Improvement: It explains the configuration requirements of Quality Improvement.
주제 5	Quality Management in Manufacturing: This topic describes the processes related to implementing QM in Manufacturing.
주제 6	Quality Inspection: It explains the configuration requirements of Quality Inspection.

최신 SAP Certified Associate C-TS414-2023 무료샘플문제 (Q15-Q20):

질문 # 15
You must assign a certification profile for outgoing certificates to key combination. What key combination that require no adjustment does SAP QM prove

A. Material /Customer, Material Material type
B. Material /Customer, Material Material group
C. Material , Customer, Material group
D. Customer, Material, Material group

정답：C

질문 # 16
If an inspection characteristic is valuated with a rejection, a quality notification should be created automatically. Which settings are required for the inspection characteristic? Note: There are 2 correct answers to this question.

A. Assignment of defect codes for rejection
B. Documentation required if rejected
C. Defects recording automatically called up
D. Assignment of an inspection method

정답：B,C

설명：
To automatically create a quality notification (e.g., QN01) when an inspection characteristic is rejected in SAP S/4HANA QM, specific settings in the master inspection characteristic (MIC, transaction QS23) are required:
* Defects Recording Automatically Called Up (A): In the MIC's control indicators, the "Defects Recording" checkbox must be activated with the "Automatic" option. This triggers defect recording and, if linked to a notification type in Customizing (SPRO > QM > Quality Inspection > Defects Recording), creates a notification upon rejection.
* Documentation Required if Rejected (B): Setting "Documentation Required" for rejection ensures that a defect or notification is initiated when the characteristic fails, supporting the automatic process (found in the MIC's "Inspection Characteristic" tab).
* Assignment of Defect Codes for Rejection (C): Defect codes are selected during recording, not pre- assigned in the MIC for automatic notification creation.
* Assignment of an Inspection Method (D): Inspection methods guide execution but don't drive notification automation.
Thus, "Defects recording automatically called up" and "Documentation required if rejected" are the correct answers.References: SAP Help Portal - "Automatic Notification Creation in QM"; SAP S/4HANA QM User Guide - "Defects Recording".

질문 # 17
A buyer creates a purchase order for a material for which QM in procurement is active What does the system verify when a target QM system is assigned to the material master? Note : 3 Correct answer

A. The defined assignments for QM systems in the implementation Guide (IMG)
B. "The vendor master
C. The purchasing info record
D. The QM quality info record
E. The inspection type

정답：A,B,D

질문 # 18
The Determine Tasks function can be used during quality notification processing. What can be defined in the response profile? Note: There are 2 correct answers to this question.

A. Task code group
B. Notification type
C. Task code
D. Cause code

정답：A,C

설명：
The response profile (transaction QMSM) in QM notifications defines automatic tasks via the "Determine Tasks" function:
* Task Code Group (A): Specifies the group (e.g., from catalog type 2) containing task codes, defining the task category (SPRO > QM > Quality Notifications > Response Profile).
* Task Code (C): The specific code within the group (e.g., "Investigate") is defined, detailing the task to be created.
* Cause Code (B): Cause codes (catalog type 5) are for problem analysis, not task definition.
* Notification Type (D): The type is set at the notification level, not in the response profile.
Thus, "Task code group" and "Task code" are the correct answers.References: SAP Help Portal - "Response Profiles in QM"; SAP S/4HANA QM User Guide - "Notification Tasks".

질문 # 19
You post a goods receipt for a purchasing document and inspection type 01 is active in the material master.
The supplier has not provided the mandatory quality certificate. Which of the following process steps is possible? Note: There are 2 correct answers to this question.

A. Posting of the usage decision
B. Confirmation of certificate receipt after usage decision
C. Recording of inspection results
D. Recording of defects

정답：C,D

설명：
For inspection type 01 (Goods Receipt) with a missing mandatory certificate (set in the quality info record, transaction QI01):
* Recording of Inspection Results (B): The inspection lot is created (status CRTD), and you can record results (transaction QE51N) even without the certificate, as this step precedes the usage decision (UD).
* Recording of Defects (D): Defects can be recorded (e.g., via QE51N or QF01) during inspection, regardless of certificate status, to document issues found.
* Confirmation of Certificate Receipt After Usage Decision (A): Certificate receipt must be confirmed before UD if mandatory (controlled by the "Certificate Check" setting); this option is not possible post- UD.
* Posting of the Usage Decision (C): UD (transaction QA11) is blocked if the certificate is mandatory and missing, as the system sets a status (e.g., CCRQ) until resolved.
Thus, "Recording of inspection results" and "Recording of defects" are the correct answers.References: SAP Help Portal - "Certificate Processing in Procurement"; SAP S/4HANA QM User Guide - "Inspection Lot Processing".

질문 # 20
......

ITDumpsKR의SAP인증 C-TS414-2023덤프의 인지도는 아주 높습니다. 인지도 높은 원인은SAP인증 C-TS414-2023덤프의 시험적중율이 높고 가격이 친근하고 구매후 서비스가 끝내주기 때문입니다. ITDumpsKR의SAP인증 C-TS414-2023덤프로SAP인증 C-TS414-2023시험에 도전해보세요.

C-TS414-2023덤프공부자료: https://www.itdumpskr.com/C-TS414-2023-exam.html