Quiz 2025 Professional CWNP Practical CWDP-304 Information

P.S. Free & New CWDP-304 dumps are available on Google Drive shared by VCEPrep: https://drive.google.com/open?id=173_eTVTBz5fxL6kUyEGaxmx3BMYRTCUM

Our CWDP-304 exam questions have always been the authority of the area, known among the exam candidates for their high quality and accuracy. According to data collected by our workers who questioned former exam candidates, the passing rate of our CWDP-304 training engine is between 98 to 100 percent! It is nearly perfect. So it is undeniable that our CWDP-304 practice materials are useful and effective.

CWNP CWDP-304 Exam Topics:

Section	Objectives
Define Specifications for the WLAN - 25%
Collect business requirements and constraints	- Business use cases and justification - User requirements - Regulatory compliance - Industry compliance - Budget - Aesthetics - Architectural constraints - Mounting restrictions - Access restrictions - Time constraints - Building codes and safety codes
Collect and define technical requirements	- Vendor selection - Location services such as RTLS - Latency requirements - Signal strength requirements - Capacity requirements - Security requirements BYOD and guest access Roaming Monitoring Authentication and encryption - Applications and their specific requirements - WLAN upgrade requirements, when applicable - Bridge link requirements, when applicable - Voice over WLAN (VoWLAN), when applicable - Client devices including most important and least capable device - Requirement areas
Collect project documentation	- Validated floor plans - Network infrastructure Network diagrams AP locations Existing network services including DNS, DHCP, NTP, and authentication servers Switch capabilities and capacity - Cabling infrastructure Cabling maps and plans Wiring closet locations - Power availability and PoE capabilities - Existing wireless systems - Previous design/survey documentation
Define requirement areas including essential metrics for each requirement	- Client device types and capabilities - Applications and their requirements - User and device density - SSIDs - Security settings - Understand common vertical markets
Gather information on environmental factors	- Building materials - Attenuation values - Ceiling heights - Site annotations (photos, notes, plans) - Wireless environment scan Packet captures Spectrum captures Wi-Fi scanners
Design the WLAN - 40%
Define WLAN architectures and select the appropriate architecture for a design	- Controller-based (physical and virtual) architectures - Distributed (cloud-based and local WNMS) - Standalone/Autonomous APs - Dynamic vs. static channel assignment - Dynamic radio management - Software defined radios - RF profiles - Select and/or recommend the appropriate equipment for the design and selected architecture (APs, antennas, controllers, managed services)
Produce a design to meet requirements	- Select and use the appropriate design tools Design and survey software and hardware Spectrum analysis software and hardware Access points and antennas Portable power source Tripods Measuring tools Cameras Personal Protective Equipment (PPE) - Select and use the appropriate design methodologies WLAN predictive design (new builds/site or area not accessible) Validated RF modeling AP-on-a-Stick (APoS) measurements Bridge and mesh planning - Understand and use the common features of wireless design software Import and scale floor plans Model attenuation of the site (including calibration) Select and place APs and antennas Adjust AP and antenna settings Define requirement areas and parameters Define channel and power settings - Select and use common vendor features and make configuration recommendations Band steering Automatic/static channel selection Load balancing RF/AP templates - Design for different client and application types VoIP handsets Laptops Handheld scanners Smartphones and tablets IoT and smart devices Location tracking systems Voice and video systems - Ensure end-to-end QoS is properly implemented WMM Wired and wireless QoS mappings QoS markings, classifications, and queues - Define and recommend security solutions Monitoring (detection and prevention) Authentication servers EAP methods Authentication types Encryption types - Design for secure roaming Secure BSS transition (roaming) Vendor roaming solutions Client support issues
Create, distributed, and communicate design documentation	- Bill of Materials (BoM) - Design reports - Physical installation guide
Deploy the WLAN - 10%
Ensure proper understanding and implementation of the design	- Implementation meeting Explain design decisions to implementers Ensure understanding of design deployment - Distribute required documentation
Recommend or perform essential deployment tasks	- Understand and perform installation procedures for different WLAN architectures (cloud-based, controller-based, WNMS, autonomous) - Infrastructure configuration supporting the WLAN (DHCP, DNS, NTP, switches, and routers) - Channel assignment, automatic radio management, and transmit power configuration - Installation procedures for cloud-based APs, controller-based APs, WNMS APs, and autonomous APs
Perform an installation audit for quality assurance	- Verify proper AP and antenna location and orientation - Verify aesthetic requirements are met - Verify physical security of the installation
Validate and Optimize the WLAN - 25%
Confirm the WLAN system is operational	- AP Status - Verify PoE provisioning of power requirements are met
Perform an RF validation survey	- Ensure coverage requirements - Evaluate impacts of contention and interference

>> Practical CWDP-304 Information <<

100% Pass Quiz 2025 CWNP Perfect Practical CWDP-304 Information

Research indicates that the success of our highly-praised CWDP-304 test questions owes to our endless efforts for the easily operated practice system. Most feedback received from our candidates tell the truth that our CWDP-304 guide torrent implement good practices, systems as well as strengthen our ability to launch newer and more competitive products. In fact, you can totally believe in our CWDP-304 Test Questions for us 100% guarantee you pass exam. If you unfortunately fail in the exam after using our CWDP-304 test questions, you will also get a full refund from our company by virtue of the proof certificate.

CWNP Certified Wireless Design Professional Sample Questions (Q234-Q239):

NEW QUESTION # 234
Of the following antenna connector types, which one is the smallest?

A. MC Connector
B. N Connector
C. Male N Connector
D. RP-TNC

Answer: D

NEW QUESTION # 235
You are designing a WLAN and nave been asked to recommend a security solution for the network The organization requires that 802 1X/EAP be implemented, but they do not have a PKI and do not wish to deploy one They suggest that mostly Windows clients. Apple phones and Android phones will be used What do you recommend?

A. Use EAP-PEAP for the authentication solution
B. Use CCMP AES with a PSK
C. Use TKIPRC4 with a PSK
D. Use FAP-TLS for the authentication solution

Answer: A

NEW QUESTION # 236
When performing a spectrum analysis walkthrough of a facility tor which you will be creating a WLAN design you detect an interferer What should you do?

A. Locate and remove the interferer immediately so that your WLAN works well
B. Make note of it using the reporting features of your spectrum analyzer or by documenting it elsewhere
C. Make a mental note of it so that you can include it in your design
D. Walk away from the project because it is best to only deploy in clean environments with no other RF signals

Answer: B

NEW QUESTION # 237
When you see the SKINNY protocol in a post-install validation protocol capture, what does this indicate?

A. VoIP is used on the network
B. Multicasting is used on the network
C. HTTPS is in use
D. Secure FTP is in use

Answer: A

NEW QUESTION # 238
Switches and APs have already been chosen by your customer. All switches support 802.3bz MultiGig interfaces and APs are 4x4:4 802.11ac wave 2 capable of using dual-5GHz and have one MultiGig interface. Some cable drops for the APs will run for more than 180.5 feet (or 55 meters). To support MultiGig, what is the best choice of cabling?

A. Cat-6a
B. Cat-5e
C. Cat-6
D. Cat-5

Answer: A

NEW QUESTION # 239
......

The VCEPrep is a reliable and trusted platform for quick and complete CWNP CWDP-304 exam preparation. At this platform, you can easily download real and verified Certified Wireless Design Professional (CWDP-304) exam practice questions. These Certified Wireless Design Professional (CWDP-304) exam questions are ideal and recommended study material for quick and complete CWNP CWDP-304 exam preparation.

Exam CWDP-304 Practice: https://www.vceprep.com/CWDP-304-latest-vce-prep.html

2025 Latest VCEPrep CWDP-304 PDF Dumps and CWDP-304 Exam Engine Free Share: https://drive.google.com/open?id=173_eTVTBz5fxL6kUyEGaxmx3BMYRTCUM

Eric Green Eric Green

Biography

Quiz 2025 Professional CWNP Practical CWDP-304 Information

CWNP CWDP-304 Exam Topics:

Define Specifications for the WLAN - 25%

Design the WLAN - 40%

Deploy the WLAN - 10%

Validate and Optimize the WLAN - 25%

100% Pass Quiz 2025 CWNP Perfect Practical CWDP-304 Information

CWNP Certified Wireless Design Professional Sample Questions (Q234-Q239):